Blog Posts - Cooling Tower



service/Perbaikan chiller,Industrial chiller,Cooling Tower,

...
by hamparan mandiri on Dec 8, 2016

Cooling tower,Water chiller,Coldstorage,Airdrayer Service Indonesia

...
by service ac jakarta-tangerang on Dec 8, 2016

Perawatan cooling tower,scalling kondensor shell and tube / tube and tube

Cleaning chiller merupakan pekerjaan yang wajib de kerja kan untuk menjaga kinerja chiller saat beroprasi untuk menghasil kan temperatur yang di inginkan.Karena apa bila Kondensor/Evaporator tersebut kotor atau sudah mulai mampat,kinerjanya pun...
by service ac jakarta-tangerang on Dec 1, 2016

Expert Tips for Cleaning Cooling Tower

Cooling towers need to be clean on regular basis to minimize bacterial growth, including Legionella Pneumophia (which causes Legionaires disease) and avoid the risk of sickness or death. Cooling tower operators should always follow maintenance proced...
by Cooling Tower Solutions on Sep 16, 2015

How to Control Biological Growth in Cooling Tower

Cooling tower performance is highly disturbed due to biological growth following scale formation in certain parts. Slime, a gelatinous organic growth and algae, a green moss is common formation in the cooling tower interior. Their presence interfere...
by Cooling Tower Solutions on Sep 15, 2015

How to Control Noise in Cooling Tower System

Maintaining low sound pressure is becoming increasingly important in cooling tower system. It has become compulsory in commercial field. Noise is objectionable sound , intangible and relative. A sound pressure level that may irritate one person can b...
by Cooling Tower Solutions on Sep 14, 2015

How to Measure Noise of Cooling Tower

Known to all, sound energy is transmitted through the atmosphere in the form of pressure waves. Sound pressure levels (SPL) is expressed in terms of decibels (dB). The frequency of sound is expressed in Hertz (cycles per second). The overall mea...
by Cooling Tower Solutions on Sep 12, 2015

Drift Eliminator in Cooling Tower

As a by-product of the cooling tower having promoted the most intimate contact between water and air in the fill, water droplets become entrained in the leaving air stream. Collectively, these solid water droplets are called drift. Please note these...
by Cooling Tower Solutions on Sep 11, 2015

How to Control Corrosion in Cooling Tower

Cooling tower operators often complain about corrosion problem. It becomes a headache when the tower stops to operate. It is seen that the metals used in a cooling tower are often susceptible to corrosion in varying degrees. Even the most sophisticat...
by Cooling Tower Solutions on Sep 10, 2015

CASING in Cooling Towers

CASING is an important part just like any other part of cooling tower. It works to accumulate water within the tower, provide an air plenum for the fan and transmit wind loads to the tower framework. However, casing must be equipped with some qu...
by Cooling Tower Solutions on Sep 7, 2015

Fan Deck of Cooling Tower

The fan deck of cooling tower act as diaphragm to transmit dead and live loads to the tower frame. Fan Deck also provides a platform for the support of the fan cylinders. It also helps for effective water distribution system.Fan Deck of cooling tower...
by Cooling Tower Solutions on Sep 4, 2015

Round Cooling Tower Gives Great Look- Expert Says.

A recent conversation with cooling tower experts, most of them mentioned that round shape cooling tower can lift the overall look of site. Now-a-days cooling towers of FRP material attracts spectators from far end. And, round shape tower is an add-on...
by Cooling Tower Solutions on Sep 3, 2015

Bacteria in Manhattan School Cooling Tower

The cooling tower of a Manhattan School has been reported to have have Legionnaraire bacteria. The tower has been disinfected after testing positive for the bacteria that causes Legionnaire's disease.The bacteria was discovered on a tower at the Conv...
by Cooling Tower Solutions on Sep 2, 2015

What is Evaporation in Cooling Tower

Evaporation is the process in which cooling water is utilized to its fullest extend in cooling tower. As such, the tower is designed to expose the maximum transient water surface to the maximum flow of air.The spray-fill cooling tower attempts t...
by Cooling Tower Solutions on Sep 1, 2015

Features of Square Cooling Tower

Square cooling towers are hot favorite among cooling tower buyers. The reason behind its popularity is its design and technical features. Square shape cooling towers are used for small scale cooling solution. Now-a-days, SQ towers are designed with t...
by Cooling Tower Solutions on Aug 31, 2015

Water Distribution System in Cooling Tower Process

Distribution of water within the circuit of cooling tower is responsibility of tower manufacturer. The magnitude and routing of the circulating water lines between the heat source and the tower location are usually dictated by the type of tower, typo...
by Cooling Tower Solutions on Aug 29, 2015

How to Maintain Water Quality for Cooling Tower Use

Everybody knows that dirt particles blow with air and pollutes water used in cooling tower process. Such situation effects the longevity of the equipment. Unexpected changes take place in the water quality. Take a look at the following points with th...
by Cooling Tower Solutions on Aug 25, 2015

Water Loading, Wind Load and Windage in Cooling Tower Process

Take a look at some cooling tower term starting from 'W'Water Loading- It is circulating water rate per horizontal square foot of fill plan area of the cooling tower.Water Rate- It is mass flow of water per square foot of fill plan area of the coolin...
by Cooling Tower Solutions on Aug 22, 2015

What is Total Air Rate, Water Rate in Cooling Tower Technology

Cooling tower technology includes lots of mechanical terms which common people do not nomenclature starting from Tunderstand. In an effort to unfold those engineering terms, let me bring to you some important.Total Air Rate: It is the total mass flow...
by Cooling Tower Solutions on Aug 21, 2015

Cooling Tower Shell, Speed Reducer, Splash Bar

Take a look at the following important parts of cooling tower starting from SSpeed Reducer- It is a mechanical device, placed in between the driver and the fan of the tower. It is designed to reduce the speed of the driver to an optimum speed for the...
by Cooling Tower Solutions on Aug 20, 2015


Trending Topics

Close