Blog Posts - Refractory Fiber Board



Features of refractory fibers

High temperature.The highest use temperature up to 1250~2500 DEG C. The most commonly used asbestos only 500~550 DEG C, slag wool is 580~830 DEG C, and aluminum silicate fiber above 1000 degrees.Heat capacity is low.Refractory fiber under high t...

Visual inspection and processing of pre laying refractory material

Boiler refractory brick masonry for planning is not the same for different, some refractory brick standard and scale error can not be satisfied with the penetration of building quality requirements, especially for hook range, azimuth and swollen join...

Several suggestions of refractories in China exported to Japan

As people’s awareness of environmental protection and the implementation, some new environmental regulations in the future, not only the requirements of zero discharge of waste refractory material itself, but also the requirements of the refrac...

Ceramic fiber Products

Products introduction: Ceramic fiber is filtered vacuum pressure forming, using blowing fiber (fiber is short, thin, easily broken mix) as ceramic fiber materials, adding a certain percentage of the inorganic binder material. After beater dispersed...

New building materials——Aluminum silicate needled blanket

Aluminum silicate needled blanket is a kind of refractory material. It is based on the aluminum silicate as raw material, adds some accessories, the technology of resistance furnace, the cloth cotton settlement, plastic needle, high stable cutting, a...


Trending Topics

Close