Blog Posts - Standard Size Of Brick

(1) Fire resistance. The low degree of fire resistance of clay refractory products is lower, and the increase of three aluminum oxide content in clay brick is improved… Generally 1580 for ~1750;(2) Load softening temperature. Fireclay ref...

Silica brick belongs to acidic refractory  material, has good acid resistance erosion ability, its good thermal conductivity, high refractoriness under load, general in 1620 DEG C above, only than the low refractoriness of 70 to 80 DEG...

Silica brick belongs to acidic refractory  material, has good acid resistance erosion ability, its good thermal conductivity, high refractoriness under load, general in 1620 DEG C above, only than the low refractoriness of 70 to 80 DEG C. Brick ther...

The heat exchanger is an important part of the center of bottom burner furnace, four corners burner soaking pit and one sided upper burner soaking pit for the preheating of the air or gas. The first two stove of heat exchanger is arranged in the stov...

Ordinary boiler boiler tube system, combustion chamber, flue and dust collector and other parts, the work is not high, mainly for industrial and civil heating and other departments. There are many types of boilers, the number of large, commonly used...

Ordinary boiler boiler tube system, combustion chamber, flue and dust collector and other parts, the work is not high, mainly for industrial and civil heating and other departments. Thereare many types of boilers, the number of large, commonly used c...

High alumina brick and clay brick of the same way of molding production. The process of crushing, mixing, molding, drying, sintering, and testing, packaging, etc.. Production practice proved that the high Al clinker in front of the broken strict...

High alumina brick and clay brick of the same way of molding production. The process of crushing, mixing, molding, drying, sintering, and testing, packaging, etc.. Production practice proved that the high Al clinker in front of the broken strictly ch...

The factors that affect the high temperature creep of refractory are many, and many factors are interrelated… The main factors that affect the creep deformation of refractory are the following:1, refractory material, including: chemical c...

Xinmi Changxing refractories experts teach you to identify the quality of refractory brick:In general, according to the contents of various chemical constituents in the refractory brick and its role, it is divided into three categories of m...

Refractory ceramic balls refractory ball in alumina industry and refractory kaolin as the main raw material, scientific formula, made of forming and high temperature firing, it has 1 high mechanical strength, long life cycle; 2. Good c...

Acceptance of fireclay brick works, to carefully check the flue; furnace stare in the firebrick, particular attention should be paid to the vault, single arch, the bottom of the device. The next small series will give you a detailed introduction: 1,...

Acceptance of fireclay brick works, to carefully check the flue; furnace stare in the firebrick, particular attention should be paid to the vault, single arch, the bottom of the device. The next small series will give you a detailed introduction:1, i...

There are a lot of people in the furnace construction and repair, for the use of what kind of refractory brick is a fog, the reason is very simple is because there are too many types of refractory brick, if is the standard types of ref...

This is the two kinds of products: silicon refractory mullite brick, mullite bricks should be. The main component is aluminum and silicon, crystalline mullite to A3S2 (3AL2O3.2SIO2). The main ingredient is magnesium spinel or spinel, n...

Clay brick firing, sometimes a “black” or “red” waste. The reason there is no consensus clear. That is due to lack of oxidizing atmosphere, and firing caused by excessive. Brick kiln firing process, if the lack of organic matter oxidatio...

Clay brick firing, sometimes a “black” or “red” waste. The reason there is no consensus clear. That is due to lack of oxidizing atmosphere, and firing caused by excessive. Brick kiln firing process, if the lack of organic matt...

(1) According to the inspection procedures and requirements, organize technical personnel, in the implementation of control operator point examination of the refractory, and fill in the inspection report; (2) in accordance with the construction stand...

(1) According to the inspection procedures and requirements, organize technical personnel, in the implementation of control operator point examination of the refractory, and fill in the inspection report;(2) in accordance with the construction standa...

According to the product and density of the different shape, sintering method, casting and meltblowing process. The sintering process is part of the raw material will burn in mature, crushing and screening, and then according to a certain ratio and r...

Trending Topics