Blog Posts - Standard Size Of Brick

Refractory clay is also called exothermic or joint material. Used as a refractory products masonry joint material.By materials can be divided into clay, high alumina, silica and magnesia refractory mud. Composed of refractory powder, b...

(1) refractoryHigher silica content of semi silica refractory products, refractory degree can reach 650 to 1710 DEG C, close to the silica brick.(2) load softening temperatureIn the semi silica refractory products, forming part of the network st...

1, high aluminum brick: Al2O3 content more than 75, refractory degrees higher than clay brick, acid and alkali resistance erosion resistance, suitable for cement kiln etc., the use of long life and high price of refractory brick.2, the dolo...

1, high aluminum brick: Al2O3 content more than 75, refractory degrees higher than clay brick, acid and alkali resistance erosion resistance, suitable for cement kiln etc., the use of long life and high price of refractory brick. 2, the dolomite bric...

High temperature industrial development cannot do without refractorymaterial function, especially in the iron and steel, nonferrous metals, glass, ceramics, cement, petrochemical, machinery, boilers, light industry, electric power, military and...

Mullite (Mullite) is compound in atmospheric Al2O3-SiO2 two series in the only stable, chemical formula 3Al2O3 – 2SiO2, the theory of composition of Al2O3 71.8%, SiO2 28.2%. Mullite is a mineral name, because of the moire Island Natural Minera...

Structure of refractory bricks will burst and its product itself also has the very big relations. Refractory brick thermal spalling, refers to the subject of the refractory brick thermal shock, in refractory brick surface and internal tempe...

High temperature. The highest use temperature up to 1250~2500 DEG C. The most commonly used asbestos only 500~550 DEG C, slag wool is 580~830 DEG C, and aluminum silicate fiber above 1000 degrees. Heat capacity is low. Refractory fiber under high tem...

Selection of refractory materials needs to pay attention to the details of knowledge. High temperature industrial development cannot do without refractory material function, especially in the iron and steel, nonferrous metals, glass, c...

Fire resistant plastic is composed of 70% ~ 80% granular and powdery materials, plus 10% ~ 25% plasticity clay binder and refractory material amount of plasticizer prepared.Plastics can be made into flake, lump. Some bond can be added in th...

Boiler refractory brick masonry for planning is not the same for different, some refractory brick standard and scale error can not be satisfied with the penetration of building quality requirements, especially for hook range, azimuth and swollen join...

Brickwork with refractory slurry should follow the following principles:(1) to deal with all kinds of refractory slurry pre experiment and pre laying brick front, confirm the bonding time, different mud initial setting time, consistency and...

Brickwork with refractory slurry should follow the following principles: (1) to deal with all kinds of refractory slurry pre experiment and pre laying brick front, confirm the bonding time, different mud initial setting time, consistency and water; (...

Load softening temperature learned from many test results, refractoriness water glass softening temperature usually begins with the heating temperature of a heating state after cooling refractory brick dust as fine grinding admixture of qua...

Load softening temperature learned from many test results, refractoriness water glass softening temperature usually begins with the heating temperature of a heating state after cooling refractory brick dust as fine grinding admixture of quartz sand a...

Both the wet process kiln, or new dry rotary kiln, in the clinker calcinations process, because the kiln gas temperature is much higher than the temperature of the materials, kiln rotates one circle, kiln lining surface is subjected to thermal shock...

Both the wet process kiln, or new dry rotary kiln, in the clinker calcinations process, because the kiln gas temperature is much higher than the temperature of the materials, kiln rotates one circle, kiln lining surface is subjected to thermal shock...

What is the relationship between the wear resistance of  refractory bricks and temperature, so here simply said what is the relationship between the wear resistance of a refractory brick and temperature.Some materials such as silicon a...

Boiler burner band main properties of refractory material should have included slag resistance, high strength, wear resistance, thermal stability, thermal conductivity and other properties. The traditional refractory belt mainly used c...

Resin bonded carbon magnetite brick because of its good thermal shock resistance and slag resistance of iron and steel industry, in particular applied basic oxygen furnace and electric arc furnace. Carbon has excellent performance such as high therma...

Trending Topics