- Expert Tips for Cleaning Cooling TowerCooling towers need to be clean on regular basis to minimize bacterial growth, including Legionella Pneumophia (which causes Legionaires disease) and avoid the risk of sickness or death. Cooling tower operators should always follow maintenance proced...
- How to Control Biological Growth in Cooling TowerCooling tower performance is highly disturbed due to biological growth following scale formation in certain parts. Slime, a gelatinous organic growth and algae, a green moss is common formation in the cooling tower interior. Their presence interfere...
- How to Control Noise in Cooling Tower SystemMaintaining low sound pressure is becoming increasingly important in cooling tower system. It has become compulsory in commercial field. Noise is objectionable sound , intangible and relative. A sound pressure level that may irritate one person can b...
- How to Measure Noise of Cooling TowerKnown to all, sound energy is transmitted through the atmosphere in the form of pressure waves. Sound pressure levels (SPL) is expressed in terms of decibels (dB). The frequency of sound is expressed in Hertz (cycles per second). The overall mea...
- Drift Eliminator in Cooling TowerAs a by-product of the cooling tower having promoted the most intimate contact between water and air in the fill, water droplets become entrained in the leaving air stream. Collectively, these solid water droplets are called drift. Please note these...
- How to Control Corrosion in Cooling TowerCooling tower operators often complain about corrosion problem. It becomes a headache when the tower stops to operate. It is seen that the metals used in a cooling tower are often susceptible to corrosion in varying degrees. Even the most sophisticat...
- CASING in Cooling TowersCASING is an important part just like any other part of cooling tower. It works to accumulate water within the tower, provide an air plenum for the fan and transmit wind loads to the tower framework. However, casing must be equipped with some qu...
- Fan Deck of Cooling TowerThe fan deck of cooling tower act as diaphragm to transmit dead and live loads to the tower frame. Fan Deck also provides a platform for the support of the fan cylinders. It also helps for effective water distribution system.Fan Deck of cooling tower...
- Round Cooling Tower Gives Great Look- Expert Says.A recent conversation with cooling tower experts, most of them mentioned that round shape cooling tower can lift the overall look of site. Now-a-days cooling towers of FRP material attracts spectators from far end. And, round shape tower is an add-on...
- Bacteria in Manhattan School Cooling TowerThe cooling tower of a Manhattan School has been reported to have have Legionnaraire bacteria. The tower has been disinfected after testing positive for the bacteria that causes Legionnaire's disease.The bacteria was discovered on a tower at the Conv...
- What is Evaporation in Cooling TowerEvaporation is the process in which cooling water is utilized to its fullest extend in cooling tower. As such, the tower is designed to expose the maximum transient water surface to the maximum flow of air.The spray-fill cooling tower attempts t...
- Features of Square Cooling TowerSquare cooling towers are hot favorite among cooling tower buyers. The reason behind its popularity is its design and technical features. Square shape cooling towers are used for small scale cooling solution. Now-a-days, SQ towers are designed with t...
- Water Distribution System in Cooling Tower ProcessDistribution of water within the circuit of cooling tower is responsibility of tower manufacturer. The magnitude and routing of the circulating water lines between the heat source and the tower location are usually dictated by the type of tower, typo...
- Cooling Tower for Saving Electrical Energy
on Aug 27, 2015
Cooling Tower is a common equipment in the industry sector. Be it small scale industry or big industrial farm, the kind of cooling device has its importance throughout the year.Cooling tower is always blamed as an equipment which consumes huge electr... - Scale Prevention in Water Cooling TowerScale problem is most common in the cooling towers. Calcium carbonate in the cooling water is the main ingredient which forms scale. The maximum amount of calcium bicarbonate that remains in the water depends upon the temperature and the carbon dioxi...
- How to Maintain Water Quality for Cooling Tower UseEverybody knows that dirt particles blow with air and pollutes water used in cooling tower process. Such situation effects the longevity of the equipment. Unexpected changes take place in the water quality. Take a look at the following points with th...
- How to measure Wet-bulb temperature in Cooling Tower ProcessMost engineers measure wet bulb temperature with the help of sling psychrometer. The wet bulb temperature is measured by causing air to move across a thermometer whose bulb is encased in a wetted muslin cloth, As the air moves across the wetted bulb,...
- Water Loading, Wind Load and Windage in Cooling Tower ProcessTake a look at some cooling tower term starting from 'W'Water Loading- It is circulating water rate per horizontal square foot of fill plan area of the cooling tower.Water Rate- It is mass flow of water per square foot of fill plan area of the coolin...
- What is Total Air Rate, Water Rate in Cooling Tower TechnologyCooling tower technology includes lots of mechanical terms which common people do not nomenclature starting from Tunderstand. In an effort to unfold those engineering terms, let me bring to you some important.Total Air Rate: It is the total mass flow...
- Cooling Tower Shell, Speed Reducer, Splash BarTake a look at the following important parts of cooling tower starting from SSpeed Reducer- It is a mechanical device, placed in between the driver and the fan of the tower. It is designed to reduce the speed of the driver to an optimum speed for the...
Mithi
Join Date:
2013-04-11
